 The Sensoray Model 2226 is a USB 2.0 HD/SD H.264 capture device, and configurable as Encoding or Decoding device. It supports many different NTSC or PAL video inputs/outputs including SDI, Composite Video, and S-Video in/out. The video formats include HD 1080i, HD 720p, and SD 480i/576i.
For the need of combining audio capturing/decoding, the Model 2226 provides different audio inputs/outputs including stereo/mono AudioJack input, XLR3 microphone input, stereo/mono Line-in/out audio input/output, and stereo headphone audio output. A single +5V power supply through a Molex 43650-0403 connector is required to power
the board.
The 2226 is a USB 2.0 A/V (Video & Audio) capture device. The 2226 supports multiple video input formats including 1080i, 720p, 480i, & 576i. The 2226 outputs MPEG2-TS with H.264 High Profile MPEG encoding for HD and H.264 Main Profile for SD. It is capable of decoding the encoded 2226 H.264 stream back to the HD & SD SDI outputs as well as the composite SD outputs. HD video is encoded in H.264/AVC High Profile Level 4.0 while SD video is encoded in H.264/AVC Main Profile Level 3.0.
A/V Multiplexing
The 2226 performs synchronization of the audio/video streams in hardware. The resulting H.264 stream is perfectly synchronized with no noticeable lip flap or delay between the video and audio.
Inputs
The 2226 video inputs/outputs include HD/SD SDI, Composite video, and S-Video. The 2226 supports stereo/mono line in/out, XLR3 microphone input, and headphone output.
Uncompressed Capture
The 2226 is capable of outputting an uncompressed video stream through the USB port of the host pc. This reduces the visual latency and the load on the host CPU when displaying video. HD video streams are downscaled to comply with the bandwidth limitations of the USB 2.0 bus.
Video Overlay
The 2226 supports full screen HD image/logo overlay at 16 bit color. The 2226 allows up to 8 hardware managed overlapping images, or an unlimited number of user defined full screen bitmaps to be added to the video stream. The video with overlay is compressed for storage on the host PC, as well as passed through to the video outputs of the 2226.
Supported Video Formats and Bit Rates
HD: 1920x1080i, 30/29.97/25Hz, 2Mbps to 20Mbps
1280x720p, 60/59.94Hz, 2Mbps to 20Mbps
SD: 720x480i, 29.97Hz (NTSC), 1Mbps to 10Mbps
720x576i, 25Hz (PAL), 1Mbps to 10Mbps
Added on (Tuesday, 13 April 2010)
 The new JPD-1201 from EVOC contains a 12.1" wide-temperature high-brightness LCD touch screen monitor with LVDS interface, resolution up to 1024 x 768, wide-temperature modular power supply, SSD and ultra-low-power Intel® Core™2 Duo CPU-based motherboard. JPD-1201 features an ideal combination of low-power, high-performance and ruggednes.
The motherboard is conformal coated and installed inside the rear cover that serves as heat sink. The product also features high protection grade (IP65), sunlight readable and high-brightness LCD screen. Connections are made through aviation connectors.
Added on (Monday, 12 April 2010)
 Model 911 from Sensoray is a PCI/104 Express 4-channel frame/video capture device designed for applications requiring a high capture rate from multiple input video channels. It supports capturing from NTSC, PAL, SECAM, RS-170, and CCIR video sources. The Model 911 provides four channels of stereo or mono audio capture associated with the four channels of video respectively.
For each video channel, the frame capture rate is up to 30 fps for NTSC and 25 fps for PAL. The total frame/video capturing rate up to 120 fps for NTSC and 100 fps for PAL. The 911 supports the following capture resolutions: D1.N (NTSC), D1.P (PAL), VGA, QVGA, QQVGA, SIF, 2SIF, 4SIF, CIF, QCIF, SQCIF, 4CIF.
Associated with each channel, general digital I/O signals are also provided for control, trigger, or alarm purposes.
A single +5V power supply through the PCI/104 express bus is required to power the board.
Specifications
| Video Formats |
NTSC, PAL, SECAM |
| Video Inputs |
4 input channels, simultaneously: 4 Composite video via a 24-pin connector, 75 Ohms; or 4 S-Video via the same 24-pin connector, 75 Ohms; or combinations up to 4 channels of video in, 75 Ohms |
| Audio Inputs |
4 input channels: associated with 4 separated video channels Stereo or mono for each channel, via four 3.5mm TRS StereoJacsk; Or, break-in stereo/mono signal from a 34-pin connector Signal level: Line-in level, +/- 1.0V |
| Video Capture Modes |
Raw: RGB or YUV |
| Video Capture rate |
Up to: 120 (30x4) frames/sec for NTSC/RS-170/CCIR 100 (25x4) frames/sec for PAL/SECAM |
| Audio Sampling Rate |
Configurable: 32 kHz, 44.1 kHz, or 48 kHz |
| Video Encoding |
Could be done by software: i.e. MPEG1, MPEG2 (MP@ML), MPEG4 (SP), or MJPEG |
| Resolution |
Up to Full-D1: NTSC: 720x480 PAL: 720x576Supported: D1.N: 720x480 D1.P: 720x576 D.5: 480x352 SIF: 352x240 2SIF: 704x240 4SIF: 704x480 VGA: 640x480 QVGA: 320x240 QQVGA: 160x112 CIF: 352x288 QCIF: 176x144 SQCIF: 128x96 4CIF: 704x576 |
| Digital I/O |
4 inputs + 4 outputs: TTL signals 4 configurable inputs/outputs, via I/O terminals; all 4 inputs + all 4 outputs on breakout 34-pin connector |
| Bus |
PCI-Express x1: Compliant of PCI-Express Base Specification (Revision 1.0/1.1) PCI-to-PCI Bridge Specification (Revision1.2) |
| OS Platform |
Windows and Linux |
| Power |
6.5W, +5V @ 1.3A |
| Temperature |
0 – 70 C |
| Board Size |
3.775" x 3.55" (96mm x 90mm) |
| Number of cameras |
NTSC per channel frames/sec |
PAL per channel frames/sec |
| 1 |
30 |
25 |
| 2 |
30 |
25 |
| 3 |
30 |
25 |
| 4 |
30 |
25 |
Added on (Monday, 05 April 2010)
 The MEC-1003 from EVOC Intelligent Technology is an ultra-small wide-temperature embedded box PC which supports built-in high-performance PC(I)/104 single board computers with stackable features. Adopting fully-sealed al-alloy rugged chassis that also serves as a heat sink, this box PC is compact and rugged. The product also possesses reasonable structure, dustproof performance, highly-reliable operation, wide-temperature, anti-vibration, anti-shock and excellent EMI performance.
Specifications
| CPU |
Onboard low power Atom™ N270 1.6 Ghz CPU |
| Memory |
Onboard 1 GByte |
| Storage |
CompactFlash and SATA |
| Video |
VGA |
| Keyboard/Mouse |
PS/2 |
| COM ports |
2 x RS232, one of which supports RS-232/422/485 |
| USB |
4 x USB2.0 |
| LAN |
2 x 10M/1000Mbps RJ45 port |
| Digital I/O |
8-channel digital I/O |
| Expansion bus |
PC/104 bus interface |
| Reliability |
MTBF≥50000 hrs |
| Operating temperature |
-40 °C ~ +85 °C |
| Storage temperature |
-40 °C ~ +85 °C |
| Power |
8 - 32 Volt |
| Dimensions |
49.8mm(H) x 166mm(W) x 152mm(D) |
Added on (Tuesday, 30 March 2010)
|
EVOC, one of the world’s leading manufacturers in IPC industry, launched the EC9-1816L2NAR, an embedded single board computer based on the new-generation Q57 chipset from Intel®. The EC9-1816L2NAR is a high-performance Embedded ATX motherboard, supporting LGA1156 package Intel® Core™ i7/Core™ i5/Core™ i3 series processors.